Krieger Specialty Products
Pre-Engineered Models
The models for bullet doors below represent a sample of the performance combinations possible.
These are Pre-Engineered Models.
We custom manufacture to your actual needs.
Bullet Resistant Doors UL-752 and N.I.J (0108.01)
Model UL 752 N.I.J (0108.01) Weapons Criteria  
BD1 Level 1 Type I, II, II-A 9mm Parabellum (Luger) Pistol 124 gr. Full Metal Jacket at 1175 fps Details
BD2 Level 2 Type II .357 Magnum Pistol 158 gr. Jacketed Soft Point at 1250 fps Details
BD3 Level 3 Type III-A .44 Magnum Pistol 240 gr. Lead/Gas Shock at 1350 fps Details
BD4 Level 4 Type IV .30-06 Springfield Rifle 180 gr. Pointed Soft Point at 2540 fps Details
BD4AP Level 9 Type IV 30-06 Springfield Rifle 166 gr. Armor Piercing (AP) bullet, velocity 2850f/sec. Details
BD5 Level 5 Type III 7.62mm NATO (.308 Winchester) 150 gr. Full Metal Jacket at 2750 fps Details
BD6 Level 6 Type III-A 9mm Parabellum (Submachine Gun Loading) 124 gr. Full Metal Jacket at 3080 fps Details
BD7 Level 7 Type III 5.56mm U.S. Army (.223 Rem) 55 gr. Full Metal Jacket at 3080 fps Details
BD8 Level 8 Type III 7.62mm NATO (.308 Winchester) 150 gr. Full Metal Jacket at 2750 fps Details
SGS SGS Type II-A 12 Gage Shotgun 437 gr. Slug and 1254 gr. "00" Buckshot Details
Bullet Resistant Doors MIL-SAMIT
Model Weapons Criteria  
BD-MIL-SAMIT Part 1 7.62mm NATO (.308 Winchester) - M80 Bal at 2750 fps Details
BD-MIL-SAMIT Armor Piercing 7.62mm NATO (.308 Winchester) - M61 AP at 2750 fps at 25 shots Details
Custom Engineered Model
The special requirements of some bullet and forced entry projects may need a custom engineered model to meet your performance demands. With Krieger's years of experience and knowledge, our engineering department can create a product to meet your specifications.
Get started by filling out the online project specification form.
Notes
  1. Hinge type on tested door for UL level 1, 2, 3, and 6 is a standard mortise butt hinge. Hinge type on tested door for UL level 4, 5, 7, 8 and 9 is a Continuous Heavy Duty Hinge, prepared on door only, field drilling and tapping on frame by others.
  2. KSP's Bullet Resistant Doors are available with up to 3 hour U/L label. We also offer positive pressure tests in accordance with Standards: U/L 10C and UBC 7-2 and 7-4. (Standard testing restrictions apply)
View the difference in ammunition and shots fired for UL 752, N.I.J (0108.01), and State Department SD-STD-02.01 bullet resistant ratings at the following comparison chart.